- How To Find Your Local Rockwell Distributor or Representative
A common question my students ask is about who should they call to purchase Allen-Bradley Software and Hardware.
To address this I send them a link to Rockwell’s website, which will allow them to look up their local Rockwell representative or distributor. These reps can help them with the following services:
Provide demo copies of software either ...
Read more... - How To Find Your Local Rockwell Distributor or Representative (M4E17)
In this episode I show you how to use the new and improved webpage to find your local Rockwell distributors (Episode 17 of The Automation Minute Season 4:)
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just ...
Read more... - Which PanelView is right for your application?
With so many different Allen-Bradley PanelViews available from Rockwell Automation, it can often be quite confusing for new customers to know which one is right for their application.
With that in mind, in today’s article I’ll run down all of Rockwell’s PanelViews to hopefully make things a little clearer!
PanelView models which are Obsolete:
Let’s start with PanelViews ...
Read more... - PanelView Plus – Seven things you need to know before using
NOTE: Check out the new version of this article HERE.
I still run into clients who are just beginning to use the PanelView Plus, even though it was released a decade ago.
So for all everyone out there who is new to the PanelView Plus, here are seven things you need to know:
1) PanelView Plus hardware features:
The original PanelView Plus came in four ...
Read more... - PanelView Plus – Twenty Five Things You Need To Know, Part 1
NOTE: If you’d like to learn about the PanelView Plus 7 Standard, check out this article.
NOTE: If you’d like to learn about the PanelView Plus 7 Performance, check out this article.
Twenty Five things you need to know about using the PanelView Plus and View Studio
Part 1 of 5
NOTE: Check out the newest version of this ...
Read more... - PanelView Plus – Twenty Five Things You Need To Know, Part 2
Twenty Five things you need to know about using the PanelView Plus and View Studio
Part 2 of 5
Setting up communications
6) Never create RSLinx Enterprise shortcut names with spaces or non-alpha characters
Never create RSLinx Enterprise shortcut names with spaces or any character besides alpha, numeric and underscores (“_”)
Also, never create RSLinx Enterprise shortcut names with the same name as ...
Read more... - PanelView Plus – Twenty Five Things You Need To Know, Part 3
Twenty Five things you need to know about using the PanelView Plus and View Studio
Part 3 of 5
Exporting and Importing Tags
11) ViewStudio HMI Tags can be exported and imported
ViewStudio HMI tags can be exported and imported to / from CSV files using the “Tag Import/Export” utility that comes with FactoryTalk ViewStudio.
Browsing for Tags
12) SLC-500 and PLC-5 users can ...
Read more... - PanelView Plus – Twenty Five Things You Need To Know, Part 4
Twenty Five things you need to know about using the PanelView Plus and View Studio
Part 4 of 5
Browsing for Tags
16) When your Shortcut shows up as a Tag
When browsing for Tags, if your RSLinx Enterprise shortcut shows up on the right side as a tag, your RSLinx Enterprise shortcut has not been “applied” to a valid processor. ...
Read more... - PanelView Plus – Twenty Five Things You Need To Know, Part 5
Twenty Five things you need to know about using the PanelView Plus and View Studio
Part 5 of 5
Downloading runtime files to your PanelView Plus
21) The PanelView Plus IP address is set via its configuration mode screen.
The PanelView Plus IP address is set via its configuration mode screen. By default, it’s set to DHCP.
You can use the “RSLinx Boot-P/DHCP ...
Read more... - Panelview Plus – Remote I/O support
With the release of the PanelView Plus 6 700-1500, Rockwell chose to no longer support the legacy Remote I/O (RIO) network.
However, for users who still need to replace old RIO PanelViews, Rockwell has made several new catalog numbers for the original Panelview Plus with firmware 5.1 and RIO support available.
These models (listed below) all have the Remote I/O communications module pre-installed. They also ...
Read more... - Panelview Plus – High-Bright Display: Seven Things You Should Know
I’ve received many questions about the PanelView Plus High-Bright display over the last few weeks, and today I want to share with you seven things you should know about it:
1) It’s Bright!
While the standard PanelView Plus display is rated for 300 cd/m2 (Nits,) the PanelView Plus High-Bright Display is much brighter, rated at 1000 cd/m2 (Nits.) That’s more ...
Read more... - Panelview Plus 7 Standard – Is It Right For You?
With Rockwell’s release of the PanelView Plus 7 Standard last month, I’ve begun to receive “migration” inquires from PanelView Plus 6 users.
NOTE: You can learn about the new PanelView Plus 7 Performance models in this article.
However, unlike the PanelView Plus 6 which replaced the original PanelView Plus, the PanelView Plus 7 is a new line with ...
Read more... - ViewME, PanelView Plus – Quick Start Videos
Rockwell’s FactoryTalk View Studio Machine Edition (ViewME) and PanelView Plus (PVPlus) can be a little challenging for new users to learn. I still remember my own frustration trying to setup RSLinx Enterprise for the first time when I received my beta copy of FactoryTalk View Studio 3.0 back in late 2003.
Since then, Rockwell has released nearly a dozen FactoryTalk View Studio Machine Edition ...
Read more... - FactoryTalk View Studio Machine Edition (M2E03)
In The Automation Minute, Season 2 Episode 3, Shawn Tierney unboxes a copy of FactoryTalk View Studio Machine Edition software.
Read more... - View Studio – Support for Windows XP / 7 / 8
Last week in this article I discussed how to use Rockwell’s PCDC webpage to look up the compatibility of Rockwell Software packages with Microsoft Windows operating systems.
In today’s article we’ll take a look at the results for FactoryTalk View:
FactoryTalk View compatibility with Windows XP:
In the above screen shot of Rockwell’s PCDC webpage we can see versions ...
Read more... - FactoryTalk Linx (RSLinx Enterprise) (P140)
Today my guest is Ron Bliss who introduces us to what’s new with FactoryTalk Linx and FTLinx Gateway in Episode 140 of The Automation Podcast.
For more information, check out the “Show Notes” located below the video.
Watch the Podcast:
The Automation Podcast is also available on most Video and Podcasting platforms, and direct links to each can ...
Read more... - PanelView Plus – Configuration Mode Menu: How To Access
So you need to update your PanelView Plus time, date, screensaver, IP address, or other setting but can’t figure out how to access it’s configuration menu?
Well don’t feel too bad as Rockwell hasn’t always made this an easy task.
The basics…
The PanelView Plus’s configuration menu is where you setup the terminal, including the clock, network settings, ...
Read more... - PanelView Plus – Configuration Mode Menu: How To Access (M3E22)
Learn how to access the PanelView Plus Configuration Menu in Episode 22 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Configuration Mode Menu: Why Is The White Box Missing / F1 Won’t Work?
Update: Check out the newest article on this topic HERE.
Why is the PanelView Plus “Goto Config Mode” white box missing on boot? Why doesn’t pressing F1 on boot bring me to the PanelView Plus configuration mode?
Yesterday we discussed how to get into the “Configuration Mode” of a PanelView Plus, and we learned the easiest way to do so was to either put ...
Read more... - PanelView Plus – Setting Ethernet Address
So you have a new PanelView Plus, PanelView Plus 6, or PanelView Plus 7, and need to set its Ethernet Address?
Or maybe you’re moving an existing PanelView Plus to a new network?
Well in today’s article I’ll show you step-by-step how to set the Ethernet address of any PanelView Plus that has Ethernet.
Step 1) Power on ...
Read more... - PanelView Plus – Setting Ethernet Address (M3E24)
Learn how to set your PanelView Plus Ethernet Address in Episode 24 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Setting Date and Time
So you have a PanelView Plus and want to set or update the internal clock?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how ...
Read more... - PanelView Plus – Setting Date and Time (M3E31)
Learn how to set the internal clock’s date and time on the PanelView Plus in Episode 31A of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Setting Date and Time (M3E31B)
Learn how to set the internal clock’s date and time on the PanelView Plus 7 in Episode 31B of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Setting Daylight Savings Time and Time Zone
So you have a PanelView Plus and want to enable Daylight Savings or change the Time Zone setting?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you ...
Read more... - PanelView Plus – Setting Daylight Savings Time and Time Zone (M3E32)
Learn how to setup Daylight Savings Time and the Time Zone on the PanelView Plus in Episode 32A of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Setting Daylight Savings Time and Time Zone (M3E32B)
Learn how to setup Daylight Savings Time and the Time Zone on the PanelView Plus 7 in Episode 32B of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Setting The Screen Saver
So you have a PanelView Plus and want to set or change its screen saver settings ?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t ...
Read more... - PanelView Plus – Setting The Screen Saver (M3E28)
Learn how to setup the PanelView Plus Screen Saver in Episode 28A of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Setting The Screen Saver (M3E28B)
Learn how to setup the Screen Saver on the PanelView Plus 7 in Episode 28B of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Changing Screen Saver Image (3.0 to 5.1)
In Today’s article I’ll walk you through how to change the Screen Saver Image used on the original PanelView Plus (old models without Windows CE desktop access)
Part 1: Enable the Screen Saver Image on your PanelView Plus
Step 1) From the PanelView Plus Configuration Menu, choose Terminal Settings:
Step 2) Next select Display, and then select Enter:
Step 3) Now ...
Read more... - PanelView Plus – Changing Screen Saver Image (3.0 to 5.1) (M4E40)
In this episode I show you how to change the Screen Saver image used on the original PanelView Plus versions 3-5.1 (Episode 40 of The Automation Minute Season 4:)
UPDATE: See new information here
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons ...
Read more... - PanelView Plus 7, 6, CE – Changing Screen Saver Image
In Today’s article I’ll walk you through how to change the Screen Saver Image used on the PanelView Plus 7, 6, and CE:
Part 1: Enable the Screen Saver Image on your PanelView Plus 7, 6, or CE
Step 1) From the PanelView Plus Configuration Menu, choose Terminal Settings:
Step 2) Next select Display, and then select Enter:
Step 3) Select ...
Read more... - PanelView Plus 7, 6, CE – Changing Screen Saver Image (M4E39)
In this episode I walk you through how to change the Screen Saver Image used on the PanelView Plus 7, 6, and CE (Episode 39 of The Automation Minute Season 4:)
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our ...
Read more... - PanelView Plus – View and Monitor Memory Usage
So you have a PanelView Plus and want to view or monitor its memory usage?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how ...
Read more... - PanelView Plus – View and Monitor Memory Usage (M3E30)
Learn how to view and monitor memory usage on the PanelView Plus in Episode 30 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – How to access the Windows Desktop
So you have a PanelView Plus 7 and want to setup Desktop Access to the Windows CE Desktop?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Note: This procedure should also work on the PanelView Plus 6. Also note that the older PanelView Plus CE (aka VersaView ...
Read more... - PanelView Plus 7 – How to access the Windows Desktop (M3E33)
Learn how to setup and access Windows CE Desktop Access on the PanelView Plus 7 in Episode 33 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Enable and Use VNC
NOTE: While this procedure works for older models as well, to see the a procedure written for the original PanelView Plus CE / VersaView CE click HERE:
So you have a PanelView Plus 7 and want to Enable and Use VNC to remotely view and or control it?
Well in today’s article I’ll show you step-by-step how ...
Read more... - PanelView Plus 7 – Enable and Use VNC (M3E34)
Learn how to setup and use the VNC Server on the PanelView Plus 7 in Episode 34 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Enable the Webserver
So you have a PanelView Plus 7 and want to enable its Web Server?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how ...
Read more... - PanelView Plus 7 – Enable the Webserver (M3E36)
Learn how to enable the Web Server on the PanelView Plus 7 in Episode 36 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Setup and Use FTP Server
So you have a PanelView Plus 7 and want to ?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how to get back to ...
Read more... - PanelView Plus 7 – Setup and Use FTP Server (M3E37)
Learn how to setup and use the FTP Server on the PanelView Plus 7 in Episode 37 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Setup and Use File Server
So you have a PanelView Plus 7 and want to enable its File Server?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how to ...
Read more... - PanelView Plus 7 – Setup and Use File Server (M3E38)
Learn how to setup and use the file server on the PanelView Plus 7 in Episode 38 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus 7 – Reset to Factory Defaults
In today’s article I’ll walk you through resetting your PanelView Plus 7 to Factory Defaults:
Step 1) Plug a USB Keyboard into your PanelView Plus 7:
Step 2) Cycle Power to your PanelView Plus 7 while holding down the F1 Key:
Step 3) When the Maintenance Menu comes up, press the down arrow key once to select “Special BOOT Option – ...
Read more... - PanelView Plus 7 – Reset to Factory Defaults (M4E38)
In this episode I discuss how to reset the PanelView Plus 7 to Factory Defaults (Episode 38 of The Automation Minute Season 4:)
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more... - PanelView Plus – Firmware: Finding The Terminal’s Version
So you downloaded a runtime application to a PanelView Plus only to get an “incompatible version” error message?
This is often caused by downloading an .MER file of a version newer than the firmware installed on the PanelView Plus in question.
To avoid this problem, insure you’re creating runtimes that are compatible with your PanelView Plus terminal’s ...
Read more... - PanelView Plus – Firmware: Finding The Terminal’s Version (M3E23)
Learn how to find your PanelView Plus firmware version as well as which versions are compatible in Episode 23 of The Automation Minute Season 3:
If you’ve found this video helpful, checkout my training courses here.
Check out our Video Collection #1 here, which includes the first five seasons of our shows for just $30!
Read more...
