Set Daylight Savings Time and Time Zone on the PanelView Plus

TAS_Banner_PVP_A


So you have a PanelView Plus and want to enable Daylight Savings or change the Time Zone setting?

Well in today's article I'll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.


Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:

Note: If you don't know how to get back to the PanelView Plus's configuration menu, check out my previous article on that topic:

Step 2) Select Terminal Settings from the main menu, then select Time/Date/Regional Settings and then select Enter:

Step 3) Now select Time Zone, and then select Enter:

Step 4) Next select the correct Time Zone for your area, and then select the Daylight Savings button:

Step 5) Select the Use Daylight Savings button to turn this feature on or off, and then select Close:

 Step 6) The final step you have to do to save your changes is to select the OK button here on the Time Zone screen, and then you're done:

Question: Did you Find this article helpful? If so, please share it with co-workers and colleagues, and for more articles about the PanelView Plus click on the link below:


You can watch a video of the above procedure in the below video(s):


 

I hope you found this article helpful. If you have any questions please feel free to post them at TheAutomationForums.com

Sincerely,

Shawn Tierney
Automation Blogger and Trainer
If you enjoyed my article, you may like my affordable courses at TheAutomationSchool.com