Article Updated November 2017:
Where to download Allen-Bradley (A-B) Variable Frequency Drive (VFD) Software:
The Rockwell Software downloads website, which host's many legacy software downloads, is where the below link to download Drives Tools comes from:
From Rockwell's Compatibility and Download webpage you can now download DriveTools32 2.50 for free.
From the Allen-Bradley Drives Explorer page here you can download a free copy of Drive Explorer Full
From Rockwell's Compatibility and Download webpage you can now download DriveExplorer 6.04.99 for free.
In the past Rockwell only offered DriveExplorer Lite for free, but with the release of CCW Rockwell has ended support for DriveExplorer and you can get version 6.04.99 using the below link (after logging into their website with a free account:)
Connected Components Workbench (CCW) download
CCW is free programming software for the Micro800 family of programmable controllers, the PanelView Component & 800 HMI, as well as for Allen-Bradley PowerFlex drives.
In fact, its the only VFD software which supports Rockwell's new PowerFlex 523 and 525 (as well as the rest of the PowerFlex line)
6.1 10 has so many new features, I highly recommend upgrading to it it you're running an older version.
As CCW requires a fairly current version of RSLinx and ControlFlash, both are included in this large download.
You can also obtain this software on DVD via an online form here, or from most Rockwell Automation and RA Authorized Distributor offices.
I hope the above links to download free software to program Allen-Bradley drives is helpful. If you have any comments or suggestions please leave them with us by using the “post a comment or question” link below.
Until next time, Peace ✌️
Shawn M Tierney
Technology Enthusiast & Content Creator
Have a question? Join my community of automation professionals and take part in the discussion! You'll also find my PLC, HMI, and SCADA courses at TheAutomationSchool.com.
Sponsor and Advertise: Get your product or service in front of our 75K followers while also supporting independent automation journalism by sponsoring or advertising with us! Learn more in our Media Guide here, or contact us using this form.
- Automation Morning Show for March 30, 2023 - March 30, 2023
- Prosoft EtherNet/IP to DH+ Gateway (P147) - March 29, 2023
- Automation Morning Show for March 29, 2023 - March 29, 2023
if they ask serial number what do you enter in that line
Good afternoon mandia,
Which package is prompting you for a serial number?
Often times you can use aa0aa0aa or just ten numbers like 0123456789.
Hope this helps,
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com