PanelView Plus – .MER Runtime: Transfer To Terminal using Memory Card

So you have a PanelView Plus, PanelView Plus 6, or PanelView Plus 7, and want to copy a new .MER runtime file to it using a memory card or USB flash drive?

Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.

Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:

Note: If you don’t know how to get back to the main configuration menu, check out my previous article on that topic:

• How do I access the PanelView Plus Configuration Menu?

Step 2) Now Select “Terminal Settings”:

Step 3) Next, scroll down and select “File Management”:

Step 4) Now select the Enter button:

Step 5) Next select “Copy Files”:

Step 6) Select the Enter button again:

Step 7) Now select “Copy Applications”:

Step 8) And select the Enter button:

Step 9) Now you’re in the “Copy Applications” screen, and you need to chose where to copy your .MER runtime file from.

“External Storage 1” would be a memory card, while “External Storage 2” would be a USB Flash Drive.

Below you’ll see both those options available as I have installed compatible devices into both ports:

Step 10) Select the location of your memory deivce and you should see a list of .MER runtime files.

NOTE: Your runtime files must be located in the following directory for the PanelView Plus to find them: “Rockwell Software\RsViewME\Runtime“

Step 11) Now select the file you wish to copy to your PanelView Plus:

Step 12) And then select “Destination”:

Step 13) Next choose “Internal Storage”:

Step 14) Then choose “Copy”:

Note: The copy process can take 2 seconds to 2 minutes, depending on the size of your MER runtime file and the devices being used.

Step 15) If a file with the same name already exists on the PanelView Plus you’ll be prompted to confirm if you would like to overwrite it:

Step 16) Once done, you will be returned to the “Copy Applications” screen and can select “Cancel,” then “Close” three times to return to the main menu:

For more information about which PanelView Plus models support which features, check out my previous article:

• Which PanelView is right for your application?

You can watch a video of the above procedure in the below video:

I hope you found this article helpful. If you have any questions please feel free to post them at automation.locals.com

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• What’s New at Insights: Member Coupons, New Podcast, New Courses and more! (W015) - December 16, 2024
• Anybus Defender Industrial Security Devices (P231) - December 11, 2024
• First Look: New Rockwell Products Shown At Automation Fair 2024 (TME06) - December 6, 2024