PanelView Plus – Twenty Five Things You Need To Know, Part 4

Twenty Five things you need to know about using the PanelView Plus and View Studio

Part 4 of 5

Browsing for Tags

16) When your Shortcut shows up as a Tag

When browsing for Tags, if your RSLinx Enterprise shortcut shows up on the right side as a tag, your RSLinx Enterprise shortcut has not been “applied” to a valid processor. This is typically seen in early versions of the software.

Graphic Display Design

17) Always check your project resolution setting before creating graphic displays

Always check the resolution of your PanelView Plus and set this in your ViewStudio project settings to match before creating graphic displays.

Also, when using the PanelView Plus 400 and 600 you will need to increase the font sizes of the objects on the pre-made “pop-up” screens ([ALARMS],  [INFORMATION], etc)

18) Use pre-loaded fonts to maintain the same look in Runtime as Development

Not every font on your PC is installed on the PanelView Plus. So if you use or other fonts besides the defaults, you may want to install these additional fonts onto your PanelView Plus to  maintain the same look and feel as in ViewStudio (see the PVPlus manual for more info.)

19) The default graphic display update rate is too slow.

When designing screens, for a quick snappy response I recommend editing the default Display Settings screen update rate property from a 1 second update to .25 or .1.

20) Always add a “goto config” button to your project

Always put a “goto config” button on at least one graphic display screen in your project. If you forget to, you can typically re-download a new project that has one (as long as you still know the communication settings.)

NOTE: Links to all of the articles in this series are below

• Everything you need to know about the PanelView Plus, Part 1
• Everything you need to know about the PanelView Plus, Part 2
• Everything you need to know about the PanelView Plus, Part 3
• Everything you need to know about the PanelView Plus, Part 4
• Everything you need to know about the PanelView Plus, Part 5

Well that’s it for today’s article and five more things you need to know before using a PanelView Plus. Come back tomorrow to find out what the final five are.

And for more articles about the PanelView Plus, check out our PanelView Plus Blog Index.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• Automation Q & A for September 20, 2024 (QA016) - September 20, 2024
• Mettler Toledo’s Weigh Module SPE (P219) - September 18, 2024
• Automation News for September 17, 2024 (N244) - September 17, 2024