Yesterday in this article I described how to download and install FactoryTalk ViewPoint.
Today I'll walk you through how to use FactoryTalk ViewPoint to publish content for a FTView Machine Edition application destined to run on a PanelView Plus.
NOTE: ViewPoint supports running on the PanelView Plus and ViewSE, but does not support ViewME station runtimes on a PC. For more detailed information on ViewPoint see this post from last week.
Publishing ViewPoint content to run on a PanelView Plus.
When you've finished your ViewStudio for Machine Edition project and wish to enable ViewPoint support, the first thing you'll need to do is install the ViewPoint Administration Tool which we covered in yesterday's article here.
Once installed, you'll find a new option under the “Application” menu. Select it to start the ViewPoint Administration Tool:
To successfully publish your content to ViewPoint, you'll start here on the default page by selecting which screens you wish to be published. You'll also need to select an initial display which will be the first display users see when they log in to ViewPoint from their browser.
Once you've made those selections, select the “publish displays” button in the bottom right corner.
This reveals two new security tabs as shown in the following two screenshots:
Once you've setup the security to your system's requirements, you'll need to press the “save” button on the bottom right.
Now you're finished with the ViewPoint setup and can close the ViewPoint Administration Tool Wizard.
Creating a PanelView Plus runtime with ViewPoint content
To transfer our newly published ViewPoint displays and security settings to our PanelView Plus we need to create a new Runtime File.
First, select “Application” and “Create Runtime” from the ViewStudio menu as you would normally do:
Next, at the very bottom of the “Create Runtime Application” pop-up window insure you have the “include ViewPoint content” checkbox checked, and that the version selected matches the version installed on your PanelView Plus:
When the project runs on the PanelView Plus you should be able to connect to it using your PC's web browser. When you do you should see the default display of your running project as in the example below:
I hope this post about how to use the ViewPoint Administration Tool to publish ViewPoint content to a PanelView Plus was helpful. If you have any comments or questions please don't hesitate to click on the “post a comment or question” link below.
Sponsor and Advertise: Get your product or service in front of our 70K followers while also supporting independent automation journalism by sponsoring or advertising with us! Learn more in our Media Guide here, or contact us using this form or by calling our office at 413-749-4300.
- Remote Access Gateways from Prosoft Technology (P103) - May 25, 2022
- Thank You For Keeping The Energy Flowing & Production Lines Going! - May 23, 2022
- New SIEMENS Products From This Week's Virtual Tour - May 20, 2022