So you have a PanelView Plus and want to view or monitor its memory usage?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how to get back to the PanelView Plus’s configuration menu, check out my previous article on that topic:
Step 2) Select Terminal Settings from the main menu, and then select System Information and Enter:
Step 3) Now select Terminal Information and Enter:
Step 4) Now select the Memory Allocation button:
Step 5) After reviewing the memory allocation select OK:
Step 6) Now to enable (or disable) the Runtime Ram Usage popup select the Runtime Ram Usage button:
Step 7) Select the Show Ram Usage button to turn this feature on or off, and then select OK:
Question: Did you Find this article helpful? If so, please share it with co-workers and colleagues, and for more articles about the PanelView Plus click on the link below:
You can watch a video of the above procedure in the below video(s):
I hope you found this article helpful. If you have any questions please feel free to post them at automation.locals.com
Until next time, Peace ✌️
If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.
Shawn M Tierney
Technology Enthusiast & Content Creator
Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.
- First Look: Connecting to a SLC-100 and Uploading the Program (TME05) - October 8, 2024
- Automation News for October 8, 2024 (N247) - October 8, 2024
- What’s New in Automation for Monday October 7, 2024 (W009) - October 7, 2024
Discover more from The Automation Blog
Subscribe to get the latest posts to your email.
Good morning Paul,
Are you saying in your PanelView Plus 600 you do not have the screen in Step 5?
Without details on your exact model I really can’t provide an answer, other than to say that is the screen where the change is made.
Note that it is extremely rare to have to change these settings – this was a problem with the initial series of PVPlus that only had 32mb of memory, but later models had more.
Shawn
On a PV+ 600 there is no option to increase the program ram allocation. How would I give my system more memory on a PV+ 600?