So you have a PanelView Plus 7 and want to ?
Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.
Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:
Note: If you don’t know how to get back to the main configuration menu, check out my previous article on that topic:
Step 2) Select Exit from the main menu, and if prompted enter in the Desktop Access password, after which you should return to the Windows CE Desktop:
Step 3) Next select Start, Settings, and Control Panel:
Step 4) Now in the Control Panel select Services near the bottom left:
Step 5) Next, in the Services screen select FTP Server to turn it on and make it change from Red to Green. Then select Done to close the Services screen:
Step 6) Now select Server Config from the bottom left of the Control Panel:
Step 7) Here select the FTP Server Tab and make any changes you need to make to the configuration.
Step 8) When done, select the OK button on the top right of the Network Server Configuration window. Then select Yes if prompted to restart services:
Step 9) Now on your PC, in a FTP client application like Filezilla, add a new connection to your PVPlus using it’s IP address and any required login information you added in step 7. Then select connect and you’ll now have access to your PVPlus 7 via FTP:
Question: Did you Find this article helpful? If so, please share it with co-workers and colleagues, and for more articles about the PanelView Plus click on the link below:
You can watch a video of the above procedure in the below video(s):
I hope you found this article helpful. If you have any questions please feel free to post them at automation.locals.com
Until next time, Peace ✌️
If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.
Shawn M Tierney
Technology Enthusiast & Content Creator
Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.
I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.
Latest posts by Shawn Tierney (see all)
- 2024 Podcast Audience Polls: Vote before January 8th! - December 18, 2024
- All 2024 Audience Choice Polls: Vote before December 31st! - December 18, 2024
- Position Guided Vision (P232) - December 18, 2024
Discover more from The Automation Blog
Subscribe to get the latest posts sent to your email.
Is it possible to set up a user/password that has access to the FTP server? How does it authenticate users?
I show in the video how to require a user to “login” to access the FTP folder… did you watch the video?
As far as the exact capabilities of your PanelView Plus when it comes to authentication, it’s version dependent – hit up the documentation for your model/firmware.
Shawn