So you have a PanelView Plus and want to set or change its screen saver settings ?

Well in today’s article I’ll show you step-by-step how to use the PanelView Plus Configuration Menu to do just that.


Step 1) Power on your PanelView Plus and return to the main configuration menu as shown below:

Note: If you don’t know how to get back to the PanelView Plus’s configuration menu, check out my previous article on that topic:

Step 2) Select Terminal Settings from the main menu, then select Display and then Enter:

Step 3) Now select Screen Saver and Enter:

Step 4) And now make any changes you wish to the Screen Saver’s timing, intensity, and even advanced settings.

NOTE: For your changes to be saved you must exit this screen by clicking on the OK button.

Note: This is what the Advanced Settings screen looks like:

 Question: Did you Find this article helpful? If so, please share it with co-workers and colleagues, and for more articles about the PanelView Plus click on the link below:


You can watch a video of the above procedure in the below video(s):



I hope you found this article helpful. If you have any questions please feel free to post them at automation.locals.com

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

shawntierney avatar


Discover more from The Automation Blog

Subscribe to get the latest posts sent to your email.