UPDATE: Rockwell has release a new version of this tool with additional features which we cover in our new article HERE.
To get the latest version, search the below website for “RSLogix Project Migrator (it also comes with RSLogix/Studio 5000 v19 and up)”
UPDATE – November 2021 by SMT: Rockwell no longer makers the Translation Tool or Project Migrator available as a download, so if you don't have either in your RSLogix/Studio 5000 installation files or discs, you can try the “new” feature in RSLogix500 v12 and RSLogix5 v10 which allows you to save your program as a Logix file by using the “save as type” menu option, and choosing “Logix Designer Files (*.ACD)” For more information see the free tech note below:
If you have a PLC-5 or SLC-500 program you would like to import into RSLogix 5000, look no further than Rockwell's free “Translate PLC-5 SLC 2.0 utility.” This utility can save you hundreds of hours of manually re-entering code, and is available free of charge from the public Rockwell Tech Note #69790.
Rockwell has also written an entire manual around converting PLC-5 and SLC-500 programs to CompactLogix and ControlLogix. If fact, if you're going to use the “Translate PLC-5 SLC 2.0” utility, I highly recommend you read this manual in full. You can find Rockwell's “Converting PLC-5 or SLC-500 Logic to Logix5550 Logic Reference Manual” using this link (right click on link to save pdf.)
Step 1: Assuming you've used the above link to download and install the “Translate PLC-5 SLC 2.0” utility, launch it.
Step 2: When the program opens you'll see the window pictured below. In this example we are going to convert a SLC-500 / RSLogix 500 program, so we'll start by choosing the radio button for the SLC-500.
Step 3: Click on the handy link on the right to launch RSLogix 500. Then in RSLogix 500, open the program you wish to convert and preform a “Save As.” Save you program as a .SLC file and then close RSLogix 500.
Step 4: Now back in the utility use the browse button to select your newly saved .SLC file, and then select Next.
Step 6: Chose your alias options and press next.
Step 11: You'll now see this final window appear as the “Translate PLC-5 SLC 2.0” utility completes and launches RSLogix 5000 to import your newly translated code.
Step 13: When the code is done importing, you'll see your new RSLogix 5000 project. At this point, it's time to hit the book mentioned at the beginning of this article to learn how to reassign I/O, and clean up any Program Conversion Errors (PCE.)
I hope you've found this “step by step” helpful. If you did, please take a moment and visit our Support page for several ideas on how you can help us.
Sponsor and Advertise: Get your product or service in front of our 70K followers while also supporting independent automation journalism by sponsoring or advertising with us! Learn more in our Media Guide here, or contact us using this form or by calling our office at 413-749-4300.
- Remote Access Gateways from Prosoft Technology (P103) - May 25, 2022
- Thank You For Keeping The Energy Flowing & Production Lines Going! - May 23, 2022
- New SIEMENS Products From This Week's Virtual Tour - May 20, 2022