Last week I walked through how to get a free copy of RSLogix Emulate 500, and in today’s article I’ll show you how to set it up.

The first step is to launch RSLogix Emulate 500 and open an RSLogix Micro or RSLogix 500 file using either the “File – Open” menu, or the open file toolbar icon as shown below:

Setup and Use Emulate-S2-E40-TAB-01

In this example, I’m going to open program P14 from my PLC Basics course:

Setup and Use Emulate-S2-E40-TAB-02

Once you select a file, the next step is to give it a virtual network address (aka Station #) on the emulated network, and press OK:

Setup and Use Emulate-S2-E40-TAB-03

This last step in RS Emulate is optional –  you can put your emulated PLC into the run mode by clicking the “Run” button on the toolbar:

Setup and Use Emulate-S2-E40-TAB-04

Now that we have an emulated PLC running, our next step is to open the “configure drivers” window in RSLinx Classic Lite.

You can open “Configure Drivers” by either selecting it from the “Communications” menu, or by clicking on the “Cable” icon on the toolbar:

Setup and Use Emulate-S2-E40-TAB-11

When “Configure Drivers” is open, select the “SLC 500 (DH485) Emulator driver” from the “Available Driver Types” drop down list:

Setup and Use Emulate-S2-E40-TAB-12

Then click on “Add New”:

Setup and Use Emulate-S2-E40-TAB-13

I recommend leaving the default name unchanged, and then clicking on OK:

Setup and Use Emulate-S2-E40-TAB-14

Next, provide a network address (aka Station Number) on the emulated network for RSLinx. I typically leave it at the default of zero, and just click on OK:

Setup and Use Emulate-S2-E40-TAB-15

With the Emulated driver added, we can now close the Configure Drivers window:

Setup and Use Emulate-S2-E40-TAB-16

To check it’s working, click the “plus sign” on the left side of the “EMU500-1 driver” in the RSWho window to expand it, and the select the”EMU500-1 driver” to insure it starts browsing: (if an RSWho window is not already open, use the menu, “Communications – RSWho,” to open one):

Setup and Use Emulate-S2-E40-TAB-17

If you see your emulated PLC show up under the”EMU500-1 driver” as shown above in the red box, then your emulated PLC has been loaded and the RSLinx driver is communicating to it.

At this point you can use the free copy of RSLogix I showed you how to get last week, and the RSLogix tip from earlier this week to go online with your emulated PLC.

If you’ve found this article helpful and would like learn more about RSLogix, RSLinx, RS Emulate, and A-B PLCs, I recommend you check out my affordable PLC video training course at PLC Basics Second Edition.

And to see a video version of the above, check out the below episode of The Automation Minute:

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

shawntierney avatar


Discover more from The Automation Blog

Subscribe to get the latest posts to your email.