Integrated Architecture – TechED15: What’s New with Integrated Architecture as seen at TechED 2015

My all time favorite sessions at Rockwell Automation’s TechED are the “What’s New” sessions.

This year these sessions didn’t disappoint, with several new products revealed in “What’s New in Integrated Architecture.”

Below I share my “top five” picks from this session, and I’ll also include the complete presentation at the bottom of this page.

CompactLogix Hardware

First up, Rockwell announces a new member of the CompactLogix 5370 family of processors, the 1769-L19ER:

I haven’t run into anyone who’s maxed out an L18 yet, but apparently this has been happening since the only difference between the L18 and L19 is the later has more memory.

The presentation didn’t mention when the L19 is coming out, or what version of Studio 5000 will be needed to use it, but if I had to guess I would say it will release in the 6-9 month time range and require v28.

Compact GuardLogix

Next we have the 5370 version of the Compact GuardLogix.

This is one product I know many are waiting for, as it’s expected to greatly reduce the cost of implementing a GaurdLogix system.

There’s also no target release date listed for this product either, but I would guess it’s probably early to mid 2016.

Studio 5000, version 27 and 28

It seems like just yesterday when version 24 was released, followed shortly there after by the stealth release of version 26.

Now according to this slide, Studio 5000 v27 and v28 will also be released in 2015:

It looks like v27 is focused on support for the PanelView 5000, while v28 is focused on supporting new hardware (assuming that’s the two new CompactLogix products above.)

ControlLogix Redundancy

Below we see updated v20.0xx redundancy firmware planned for this summer, as well as v24.5 firmware scheduled to arrive next year:

Human Machine Interface Hardware

My final new product pick is the PanelView 5000:

This new operator interface will program from inside Studio 5000 v27 using the new View Designer component.

From what I’ve heard, the first release of this new HMI will be quite limited, so you’d be advised to do your research prior to using the first release of this new PanelView.

Want to see what else Rockwell showcased in “What’s New in Integrated Architecture?” If you do, I’ve embedded the entire presentation below my signature.

And as always, if you have any comments, questions, or suggestions, you can leave them with us by filling out the “post a comment or question” link below.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• TAP228 Aftershow: Can Ai Really Explain, Write and Edit PLC Code? (PAS01) - November 22, 2024
• Automation Q & A for November 22, 2024 (QW023) - November 22, 2024
• SLC-500 Migrations Compared: SoftPLC vs Studio 5000 (S2E10) - November 21, 2024

Update 05/15/23: Unfortunately the presentation is no longer available