At this year’s Automation Fair, Prosoft showed a new product that allows Ethernet communications to be transmitted over “blue hose,” or more specifically, “Belden 9463.”
The targeted market for this product is legacy migrations of PLC-5 and SLC-500 systems. These older systems often relied on Data Highway Plus (DH+) for peer to peer communications, and RIO for remote I/O communications.
DH+ and RIO both use Belden 9463, a shielded twisted pair cable that allowed for networks up to 10,000 cable feet. And Belden 9463, with it’s blue outer jacket, is affectionately known in plants around the world as “blue hose.”
The Prosoft system (pictured below) relies on two main components: a master device and at least one slave device. Additional slave devices can be added as needed up to 32 devices. However, each device must be within 1500 cable feet of the previous one. This means a network of 10,000 feet would require a minimum of one master and six slaves.
Each device contains three Ethernet ports for use with remote Ethernet devices. In testing, Prosoft found they could easily accommodate remote Ethernet/IP I/O with an RPI as low as 3ms. For most applications that update rate will be more than adequate.
The Prosoft Ethernet over Blue Hose system, consisting of at lease one MCE-BHM-AC and one MCE-BHS-AC, should be available early next year. The target price for one master and one slave is just under $3,000.
If you have any questions or comments please click on the “post a comment or question” link below,
Until next time, Peace ✌️
If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.
Shawn M Tierney
Technology Enthusiast & Content Creator
Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.
- PRTG’s OPC UA Server: IT & OT Monitoring for your SCADA, HMI, or PLC (P226) - November 6, 2024
- 2024 Audience Choice Poll #10: Vote for your preferred Sensor / Reader Vendor - November 6, 2024
- Automation News for November 5, 2024 (N255) - November 5, 2024
Discover more from The Automation Blog
Subscribe to get the latest posts sent to your email.