Moving (aka rehosting) a Rockwell Automation FactoryTalk Activation

Truth of the matter is, if you have internet access it’s a very easy task, and I’ll run through the steps below:

On the PC you would like to remove the activation from:

Step 1: Connect your PC (with the activation file you would like to move, aka rehost, to another PC) to the internet

Note: While there are many ways to re-host an activation, doing so via the internet is the easiest. However, if your PC doesn’t have internet access I recommend calling Rockwell at 440-646-3434 for free activation telephone support.

Step 2: Open the FactoryTalk Activation Manager

Step 3: Click on “Manage Activations”

Step 4: Click on “Rehost Activations”

Step 5: Select, “I have internet access from this Computer,” and then click on the “Select Activations” button on the bottom right of the program.

Step 6: Select the activation you would like to rehost and click on the “Complete Rehosting” button on the bottom right of the program.

Once the rehosting has completed you’ll receive a confirmation message. At that point the activation will again be available on Rockwell’s servers, and you’re ready to “Get Activations” in the FactoryTalk Activation Manager on the PC you wanted to move the activation to.

However, if you get a negative response after pressing the “Complete Rehosting” button, something has obviously gone wrong and I suggest getting free activation telephone support from Rockwell at 440-646-3434.

Additional Resource: If you would like to watch a Rockwell video of the rehosting procedure, click here.

I hope you’ve found this article on moving / rehosting your FactoryTalk activation helpful. If you have any questions or comments you can leave them by filling in the “post a comment or question” link below.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• TAP228 Aftershow: Can Ai Really Explain, Write and Edit PLC Code? (PAS01) - November 22, 2024
• Automation Q & A for November 22, 2024 (QW023) - November 22, 2024
• SLC-500 Migrations Compared: SoftPLC vs Studio 5000 (S2E10) - November 21, 2024