Getting Started With Programmable Controllers (PLC)

I often get asked what is the best way to learn how to program PLC’s?

In my opinion, there’s nothing like first hand experience. Therefore, I always recommend buying a small Micro PLC to use at home as the best way to learn.

But then comes the obvious next questions: Which Micro? What software will I need? Are there any special cables I need to buy? What about I/O?

With that in mind, in today’s article I’m going to list the items I would recommend to anyone who would like to learn how to use and program PLC’s.

PLC Starter Pack: Items I recommend to anyone who would like to get started programming PLC’s:

1) Micro PLC: Allen-Bradley MicroLogix 1000, 1761-L10BXB ($150)

I chose this particular model because it’s inexpensive ($150,) it’s 24vDC powered (safer than 120VAC,) and it programs with FREE software that’s very much like the popular PLC-5 and SLC-500.

For more information about the MicroLogix 1000 check out the below links:

• http://www.theautomationblog.com/the-allen-bradley-micrologix-1000/
• http://www.theautomationblog.com/episode-22-micrologix-1000-basics/

2) RSLogix Micro Starter Lite (Free)

This is the free programming software for the MicroLogix 1000 and 1100. For information on how to get it, visit the below link

•  http://www.theautomationblog.com/free-micrologix-1000-programming-software/

3) Low cost cables ($55)

Since the MicroLogix programs via serial, below I link to a low cost serial cable as well as a USB to serial adapter needed if your PC doesn’t have a serial port.

• Generic Serial to MicroLogix Cable, $30
• USB to Serial adapter, $25

4) Inputs and Outputs ($56)

There’s nothing like actually wiring up inputs and output to your PLC, and below I list the low cost push button station, LED pilot lights, and a Pilot Light enclosure I used to make my Micro Basics video:

• Low cost Push Button Station, $16
• Low cost LED Pilot Lights, $6 x 4
• Low cost Pilot Light Enclosure, $16

5) Micro Programmable Controller Basics DVD

This last item is a four hour instructional DVD by yours truly 😉

I spent the better part of a year creating this four hour DVD for the backers of my Kickstarter project, and now it’s currently available as either a two disc DVD or via HD Steaming.

To find out more about it just head over to PLC Basics to be taken to the product page for this video at The Automation School.

I hope you’ve found the above article about the items I recommend for a PLC Starter Pack helpful.

If you have any comments, questions, or suggestions, please don’t hesitate to click on the “post a comment or question” link below to share them with us.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• Merry Christmas! - December 25, 2024
• 2024 Podcast Audience Polls: Vote before January 8th! - December 18, 2024
• All 2024 Audience Choice Polls: Vote before December 31st! - December 18, 2024