Home A-B PLC MicroLogix

MicroLogix

How to setup RSLinx comms and connect to a MicroLogix 1200

So you need to know how to setup RSLinx Classic to communicate to an Allen-Bradley MicroLogix 1200 in order to download or go online with RSLogix? Well you're in luck as in today's article I'll walk you step by step through...

This Week On The Automation Minute

This week on The Automation Minute Last Friday I discussed what I think is the best PLC to learn on: [youtube https://www.youtube.com/watch?v=HBuBk85Osu4?rel=0] This Thursday I released a three part series on using the PanelView Plus Serial DH-485 driver: Note: These videos were going to...

I want to learn A-B PLC's, which model should I get?

This is a common question I get here on the blog and from my students at TheAutomationSchool.com. And while Rockwell has released many different platforms since 1970, there's one current gen and one last gen I usually recommend. Budget Minded First let's assume...
MicroLogix-1400-LCD-Trim-Menu-Trim1-Sel

Using the MicroLogix 1400′s LCD To Change Trim Pot Values

The MicroLogix 1400's LCD display allows access to many of it's features and functions. In today's article, we show you how to use it to change the Micro's Digital Trim Pot values: Changing Trim Pot values on the MicroLogix 1400 1) When the...
MicroLogix-1400-LCD-DCOMM-Menu-Enable-Conf

Using the MicroLogix 1400′s LCD To Enable Default Comms

divider] The MicroLogix 1400's LCD display allows access to many of it's features and functions. In today's article, we show you how to use it to enable channel 0's default communication settings. NOTE: When "Default Comms" is enabled, the MicroLogix 1400's Channel...

Connect With Us!

274FansLike
677FollowersFollow
7,552SubscribersSubscribe