Studio / RSLogix 5000 – How to connect to an existing Controller

In today’s article I cover how to upload and go online  to an existing ControlLogix or CompactLogix controller for the first time when you don’t already have the program in the controller on your PC.

Prerequisite: Before following the below procedure you must have already setup RSLinx Classic to communicate to your target Programmable Controller. To learn how to do so, check out our previous RSLinx articles HERE.

Step 1)  From the Studio 5000 splash screen select “From Upload”:

Note: If you’re using RSLogix 5000, then open it and then select “Communications – Who Active”:

Step 2)  Next, from the network browse window select the controller in question. Below is how it will look in Studio 5000:

Note: This is how it looks in RSLogix 5000:

Step 3)  Next, in the “Connected to Upload” window, click on the “Select File” button:

Step 4) Then enter in a name for the file you are uploading, and click on “Select”:

Step 5) When prompted, confirm your choice by selecting “Yes”:

Step 6) After a moment you’ll see the controller’s program uploading:

Step 7)  Once done, you should find you have uploaded the program and are online with the Controller. At this point I always perform another “File – Save”:

Watch a demonstration of this procedure below in Episode 1 of The Automation Minute Season 4:

Have a question or comment? Please feel free to leave them with us HERE.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• SLC-500 Migrations Compared: SoftPLC vs Studio 5000 (S2E10) - November 21, 2024
• Copia’s Ai Copilot Documents, Converts & Writes PLC Code (P228) - November 20, 2024
• Automation Q & A for November 15, 2024 (QA023) - November 15, 2024