READ FIRST: As of April 2020 this procedure has changed – see the new article HERE for the updated steps.
Original Article:
How to get free programming software for the MicroLogix 1000 and MicroLogix 1100:
Step 1: Visit http://www.AB.com
Step 2: Search for MicroLogix Downloads
Step 3: Choose the second link in the return results
EDIT: This link now shows up farther down in the search results in 6th place versus 2nd.
Step 4: Click on RSLogix Micro Starter Lite
Step 5: Choose your save location and download
Optional steps if you have a physical MicroLogix to connect to
Step 6: Click on RSLinx Classic Lite
Step 7: Choose your save location and download
Optional steps if you would like to connect to a virtual MicroLogix
Step 8: Click on RSEmualte 500
Step 9: Choose your save location and download
I hope this step-by-step on where to find the free RSLogix Micro Starter Lite software was helpful. If you have any comments or questions please click on the “post a comment or question” link below.
Until next time, Peace ✌️
If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.
Shawn M Tierney
Technology Enthusiast & Content Creator
Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.
I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.
Latest posts by Shawn Tierney (see all)
- TAP228 Aftershow: Can Ai Really Explain, Write and Edit PLC Code? (PAS01) - November 22, 2024
- Automation Q & A for November 22, 2024 (QW023) - November 22, 2024
- SLC-500 Migrations Compared: SoftPLC vs Studio 5000 (S2E10) - November 21, 2024
Discover more from The Automation Blog
Subscribe to get the latest posts sent to your email.
NOTE: As of April 2020 this procedure has changed – see the new article for the updated steps:
https://theautomationblog.com/mld
hola buenas tardes
no pude descargar el sof de micrologix 1000 gratis
Did you try the updated procedure? The link to it is below:
https://TheAutomationBlog.com/MLD
Hope this helps,
Shawn Tierney,
Instructor at http://www.TheAutomationSchool.com
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
Hai I want software for micrologix 1000
https://theautomationblog.com/mld
Dear Sir,
I can’t able to download the emulate software. Please give the proper guidelines to me.
Good morning Arun,
These are the directions to download RSLogix Micro Starter Lite.
The instructions to download the emulator are here:
https://theautomationblog.com/how-to-get-a-free-copy-of-rslogix-emulate-500/
Hope this helps,
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
Dear Sir, Thank you so much.. your guidelines is too useful to me..
You’re very welcome,
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
HI shawn!
i have downloaded RsLogix microcontroller but cant edit it.
can you help me solving this issue
Syed,
Not sure exactly what you are asking… sounds like you downloaded the free RSLogix Micro Starter Lite software.
This software is free for use with the MIcroLogix 1000 and 1100. Is the program you’re trying to edit for a 1000 or 1100?
Sincerely,
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
is this software free forever? or is it a trial pack?
Good morning,
It’s free forever – well since July 2009.
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
Shawn,
thanks so much for this information. I have a MicroLogic sitting in my basement that I am not using and a friend with a young son who has opened a pumpkin stand so he can raise money to build a robot. https://www.facebook.com/pages/Lincolns-Pumpkin-Stand/1546863968877157
I thought Lincoln might be able to use the MicroLogic to learn some automation, I just needed the software. Thanks for helping me make a young smart kid happy.
Rob
Glad it helped Rob!
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
Hay Please Give me Software for MicroLogix 1200 download link
Abu,
The MicroLogix 1200 software is not free – more info below:
http://www.theautomationblog.com/rslogix-micro-starter-unboxing/
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com
Hello Tieney,
can i have Rslogix 5oo software free.
Thank you
Good morning najim,
I am not the manufacturer of RSLogix 500, therefore it is not mine to give.
That said, your local Rockwell representative can provide you with a 30 free temporary version via email.
Hope this helps,
Shawn Tierney
Join my free community to follow along! You can also become a member and support our work at: Automation.Locals.com