With the recent announcement from Rockwell Automation that the MicroLogix 1000's status has been changed to “End of Life,” many users are asking, “What's the best Micro to migrate too?”
Since there are many Micros to choose from, to answer this question we need to know what is more important to the user: program compatibility or product cost?
Most Compatible Option
Note: The opening to the MicroLogix 1200's programming port is smaller than the 1000's, so in your have an old series A or B programming cable you may need to buy a new one. For information about a low cost programming cable we've tested in-house, see our review article here.
Lowest Cost Option
If you're in a situation where cost of each Micro purchased is the most important factor, and re-entering your existing MicroLogix 1000 program into a new editor is a task you're willing to do in order to save money on the hardware, then the Micro830 option is well worth exploring.
And in addition to Ladder Logic support, CCW and the Micro830 also support the Function Block Diagram and Structured Text languages, as well as long integer and real data types.
However, there is no conversion tool available today from RSLogix to CCW, so converting your 1000 code to the 830 will be a manual process.
And while the Micro830 does also have an 8-Pin Mini Din port for serial communications, you actually program it using an off-the-shelf USB cable, the same style used to connect a PC to a printer (A to B.)
The Micro830 comes in four I/O sizes: 10, 16, 24, and 48 point models. Each model also supports anywhere from two to five plugin expansion I/O modules.
However, if your main concern is the cost of the hardware, and you're not averse to learning new programming software or re-entering your code, then the cost saving of the Micro830 definitely makes it an option worth exploring.
I hope the above article regarding MicroLogix 1000 migration options was helpful.
If you have any comments, questions, or suggestions, please don't hesitate to leave them here by using the “post a comment or question” link below.
Sponsor and Advertise: Get your product or service in front of our 70K followers while also supporting independent automation journalism by sponsoring or advertising with us! Learn more in our Media Guide here, or contact us using this form or by calling our office at 413-749-4300.
- Interviewing Marc LeVine on Job Skills Needed in Industrial Automation (P108) - June 30, 2022
- PLCs: Past, Present, and Future - June 24, 2022
- How To Download Rockwell's Integrated Architecture Builder (2022) - June 23, 2022