PanelView Plus 7, 6, CE – Changing Screen Saver Image

In Today’s article I’ll walk you through how to change the Screen Saver Image used on the PanelView Plus 7, 6, and CE:

Part 1: Enable the Screen Saver Image on your PanelView Plus 7, 6, or CE

Step 1) From the PanelView Plus Configuration Menu, choose Terminal Settings:

Step 2) Next select Display, and then select Enter:

Step 3) Select Screen Saver, and then select Enter:

Step 4) Now select Advanced Settings:

Step 5) Here insure “Screen Saver Image” is set to Enabled. Then exit this screen and the previous one by clicking on “OK” to insure your settings are saved.

Part 2: Copying new Screen Saver Image to the PanelView Plus

Step 6) Copy your custom 80 pixel by 80 pixel .bmp (bitmap) screen saver image to the root directory of a compatible memory card or USB drive.

Step 7) Insert your memory card or USB drive into your PanelView Plus 7, 6, or CE HMI:

Step 8) Exit the Configuration Menu to access the Windows CE desktop:

Note: On some models you will need to know the Desktop Access password:

Step 9) Use Windows Explorer to copy your BMP image from your memory device to your PanelView Plus’s \windows directory:

Step 10) Now launch Windows Control Panel:

Step 11) Open Display Settings, and then select the Screen Saver tab:

Step 12A) On the PanelView Plus 6 and 7, remove ssfloat and add you image:

Step 12B) On the PanelView Plus CE and VersaView CE, select your image from the \windows directory by using the Browse button:

Step 13) Click on OK to save your settings, and when the PanelView Plus next goes into screen saver mode you should see your custom image in place of the A-B logo:

To watch a video demonstration of the above, check out Episode 39 of The Automation Minute Season 4 below:

If you found this article helpful, please share it with your colleagues on LinkedIn, Facebook, Twitter or Goggle Plus!

And if you know anyone who would benefit from PanelView Plus training, please let them know about my affordable courses over at TheAutomation School.

You can also share your own thoughts and opinions on this subject by clicking on the “post a comment or question” link below.

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

• Author
• Recent Posts

Shawn Tierney

I'm a lifelong Technology Enthusiast who started programing in the early 80's on the new Apple II and VIC-20 personal computers. After earning a degree in Electronics, I worked as a Certified Automation Specialist for 25 years before leaving to focus on teaching at The Automation School, as well as publishing industry news and product how-to’s at The Automation Blog.

Latest posts by Shawn Tierney (see all)

• Merry Christmas! - December 25, 2024
• 2024 Podcast Audience Polls: Vote before January 8th! - December 18, 2024
• All 2024 Audience Choice Polls: Vote before December 31st! - December 18, 2024