Finding a MicroLogix 1100’s IP and MAC Address



The MicroLogix 1100 includes an Ethernet port with a fixed MAC address, as well as a settable Ethernet IP address. In today’s article we’ll show you how to find both.

Finding the MAC address on a MicroLogix 1100:

1) Thankfully, each MicroLogix 1100 comes with it’s unique MAC address stenciled on it. To find it, remove the battery compartment cover on the right side of the Micro:

MicroLogix-1100-MAC-IP-Location2) At the very bottom of the compartment, directly under the battery plug, you will see the MicroLogix 1100 MAC address. . The MAC Address of the unit pictured below is: 00:0F:73:00:23:26
MicroLogix-1100-MAC

Finding the IP and MAC address of a MicroLogix 1100 using the built-in LCD:

1) When the MicroLogix 1100 is powered on, it displays the I/O Status screen as shown below:

MicroLogix-1100-LCD-Home-IO-Status2) To find the Micro’s IP and MAC address using the LCD,  we need to access it’s menu. To do this, press the ESC button and you should see the display below:

MicroLogix-1100-LCD-Menu3) Next, press the down arrow button four times to select “Advanced Set,” then press the OK button:

MicroLogix-1100-LCD-Menu-Page-2-User-Display-Selected4) Here, press the down arrow button twice to select “ENET CFG,” then press the OK button:

MicroLogix-1100-LCD-Advanced-Menu-ENET-Selected5) Now you will see displayed the MAC address followed by the IP address of your MicroLogix 1100.

MicroLogix-1100-LCD-Mac-Ip-Display6) To return to the I/O Status display, press the ESC button until you see the main menu, and then select “I/O Status” and press the OK button:

MicroLogix-1100-LCD-MenuI hope the above procedure on how to find a MicroLogix 1100’s IP and MAC address was helpful.

If you have any comments, questions, suggestions, or corrections, please feel free to leave them with us by filling out the “post a comment or question” link below.

Until next time, Peace ✌️ 

Shawn M Tierney
Technology Enthusiast & Content Creator

Have a question? Join my community of automation professionals and take part in the discussion! You'll also find my PLC, HMI, and SCADA courses at TheAutomationSchool.com.

If you found this content helpful, consider buying me a coffee here.

Shawn Tierney

(4,581 views)

3 COMMENTS

  1. Hi all,kindly assist on how to configure ML1100 Processor and Windows 7 Ultimate Laptop via Ethernet using a Dlink WIFI Router.Thanks in advance.

  2. Is there a default I.P. address on the 1100’s? I have one that shows the MAC address on the LCD screen but shows -.-.-.- for the IP address. Any guidance would be greatly appreciated. Thanks.

LEAVE A REPLY

Please enter your comment!
Please enter your name here