As I was filming new lessons for my CompactLogix course yesterday, I ran into an issue with version 15.01 of ControlFlash that I'm sure many other programmers have or will run into as well.

Note: If you've never used ControlFlash but need to, I've previously published step-by-step guides to flashing A-B Programmable Controllers over Ethernet (here) and USB (here.) I also have a guide on how to download Allen-Bradley Firmware here.

That said, you may find that when you download firmware files from Rockwell's website that ControlFlash just seems to ignore them.

Why? Well, in today's article I'll cover three reasons this might happen.

First, you need to be sure you copy any downloaded Firmware files into the directories ControlFlash is set to use.

To see which directories your particular ControlFlash installation is monitoring, launch the software, then click on next, and then click on browse:

Second, you need to make sure the files you've downloaded have the “.dmk” extension. If your Firmware files have a “.zip” extension, you'll need to rename them to “.dmk”.

To do so, first check that you have File Explorer set to display “File Name Extensions” (that setting is found under the “View” tab, as shown below.) Then rename your downloaded Firmware file's extension from “.zip” to “.dmk”:

Third, when you select the catalog number of your Controller, you may find that no matter what you do ControlFlash just won't show any version higher than 30.011:

The reason for this issue seems to be that versions after 30.011 are now “bundled” together under a family or controller line.

So in order to access those newer versions, you'll want to select the entire line or family like I do below:

I hope the above article helps those of you who ran into this issue like I did while filming my Compact Basics course.

If you have any questions or comments about this issue, you can post them in our free forum by clicking on the “post a comment or question” link below.

Sincerely,

Shawn Tierney
Automation Instructor and Blogger (post views: 4,176 views)

Enjoy the benefits of membership! Patreon.com/automation
Check out my affordable courses: TheAutomationSchool.com
Ask me questions by clicking here to go to the comments link
Have an industrial automation news tip? Share it with us here

Avatar


Click HERE to scroll down to view or leave comments


15 Blog Comments

    • You’re very welcome Tom!

      Shawn

      Find my articles or comments helpful? Check out my courses here.
      Support our site to disable ads, get free downloads, & more here.
      Have a news tip? Share it with us here.

  1. …versions after 30.011 are now “bundled”. That was what I need to read. Thanks for your help. I suppose it really does make sense from an organizational point of view.

  2. Thank you, I thought I was going crazy. I’ve been using Logix 5000 for over 20 years and it was not intuitive where the new firmware was, I never thought to scan past the L83E, L85E entries while looking for my L84E.

  3. Thanks for the help, I’ve spent 3hrs chasing my tail with downloading the firmware from Rockwell and trying to get it into the PLC. I’m no novice as used Rockwell and Siemens for decades but this new version was totally different. If it ain’t broke don’t fix it – Rockwell

  4. I am experiencing the same thing, but the “controller families” are not showing in my controlFLASH. I am using controlFLASH v15.01 and Logix v30.01.

    To be more specific, I need to add the CompactLogix 5370 (1769-L3) family to my inventory list to update the firmware on my 1769-L33ER controller.

    Is it possible to add items to the inventory list?

    Thanks for any help!

Leave A Blog Reply Here

Please enter your blog comment!
Please enter your name here