Allen-Bradley

How To Add ControlNet Point I/O To ControlLogix (video)

In this week's episode of The Automation Show, we take a look at how you add ControlNet Point I/O to a ControlLogix system: For more information, check out the "Show Notes" located below the video. The Automation Show, Episode 18 Show...

How To Add Ethernet Point I/O To ControlLogix (video)

In this week's episode of The Automation Show, we take a look at how you add Ethernet Point I/O to a ControlLogix system: For more information, check out the "Show Notes" located below the video. The Automation Show, Episode 17 Show...

Why Doesn't ControlFlash Find My Firmware Files?

As I was filming new lessons for my CompactLogix course yesterday, I ran into an issue with version 15.01 of ControlFlash that I'm sure many other programmers have or will run into as well. Note: If you've never used ControlFlash...
video

Using the Micro800 Simulator with CCW and FTView (video)

In this week's episode of The Automation Show, we take a look at how you can use the Micro800 Simulator with CCW and FactoryTalk View & Linx: For more information, check out the "Show Notes" located below the video. The Automation...

Connect FactoryTalk View and Linx to the Micro800

One of my connections recently shared how he was able to connect FactoryTalk View Studio to the new Micro800 Simulator (thanks Floyd!) After reviewing his email, I thought it would be a great opportunity share with everyone how you setup...

How to use CCW's Micro800 Simulator

In today's article we'll cover how to use the new Micro800 Simulator that comes with CCW 12, including how to work around a few common issues you may run into: First, what is the Micro800 Sim? Below is the official description...

Fatal Application Error Encountered in Studio 5000 Logix Designer

As I was prepping to film additional lessons for my CompactLogix course yesterday, I ran into a completely new Studio 5000 Logix Designer "Fatal Error" that I hadn't run into before. After I duplicated the issue on two different PCs,...
video

First Look: Connected Components Workbench 12 (video)

We take a first look at the new features of Connected Components Workbench version 12 in this week's episode of The Automation Show : For more information, check out the "Show Notes" located below the video. The Automation Show, Episode 12...

What's New in Connected Components Workbench 12

Earlier this week Rockwell released version 12 of Connected Components Workbench. Below I'll summarize the new features as documented in the release notes: New CCW Features: Support for new products including the Micro870 with AC Inputs, Spectrum Controls MicroSD plug-in module...

Do you use Alias Tags? Automation Talk for March 22, 2019

One limitation of legacy programmable controllers like the PLC-5, SLC-500, and MicroLogix, was the inability to save "address names," known as "symbols" in the aforementioned products, directly to the controller. And since these "symbols" could only be saved with the...

Connect With Us!

685FollowersFollow
8,080SubscribersSubscribe