Networks

The SLC-500: Communicate and Download over DH-485 using RSLinx and RSLogix 500

So you need to know how to setup RSLinx Classic to communicate over DH-485 to an Allen-Bradley SLC-500 so you can download or go online with RSLogix? Well you're in luck as in today's article I'll walk you step to setup...

USB to Data Highway Plus using the ANC-120e, a lower cost alternative to the...

In today's episode of The Automation Podcast I take a look at the ANC-120e USB to Data Highway Plus converter from Automation Networks. Now you may be asking yourself why the folks over at Automation Networks would release a USB to...

PLC-5 and SLC-500: Communicate and Download over Data Highway Plus using RSLinx and RSLogix

So you need to know how to setup RSLinx Classic to communicate via USB over Data Highway Plus to an Allen-Bradley PLC-5 or SLC-5/04? Well you're in luck as in today's article I'll walk you step to setup through how to setup...

How to add ControlNet Flex I/O to ControlLogix (Article & Video, TAS 22)

In today's article (and video) I walk through how to add ControlNet Flex I/O to a ControlLogix system: NOTE: This article is not a comprehensive ControlNet tutorial, so if you're not already familiar with ControlNet you'll likely want to learn...

PanelView Standard to SLC-500 & MicroLogix over DH-485 (Video S30)

In this week's episode of The Automation Show, I cover how to use PanelBuilder 32 to create and download a program to a PanelView Standard to communicate to a SLC-5/03 and MicroLogix PLCs over a Data Highway 485 network: For...

The SLC-5/05: How to set the Ethernet IP Address using BOOTP

How to set the Ethernet IP Address of a SLC-5/05 Controller using the free BOOTP-DHCP utility. If you have a new SLC-5/05, or one that has been reset to Factory Defaults, one option to set it's IP Address is to use...

How To Add Profinet I/O & Drives To S7-1500 (Video, TAS 24)

In this week's episode of The Automation Show, John DeTellem walks us through how to add PROFINET (Ethernet) I/O and Drives to an S7-1500 using TIA Portal: For more information, check out the "Show Notes" located below the video. [vimeo 366833029...

First Look: USB To Data Highway Plus Using The ANC-120e (Video, TAP 35)

Learn how to connect your PC to Data Highway Plus using USB and a much lower cost alternative to the 1784-U2DHP, the ANC-120e from Automation Networks, in Episode 35 of The Automation Podcast. Watch the Podcast: [vimeo 365837699 w=750 h=420] Listen to the...

How To Set The IP Address Of A New Siemens S7-1200 PLC (Video, TAS...

In this week's episode of The Automation Show, we take a look at how you set the IP Address of a new Siemens S7-1200: For more information, check out the "Show Notes" located below the video. [vimeo 366837103 w=750 h=420] The Automation...

Enhanced Features of Profinet

Choosing industrial communication interface for an automation device requires that the network functionality and presuppose task be ascertain for ease of selection. Selecting a Profinet interface may enhance industrial communication for devices. In this article, we will consider some of...

Connect With Us!

707FollowersFollow
9,130SubscribersSubscribe