ControlNet

Migrate / Convert – ControlNet I/O to EtherNet I/O

If you have had ControlLogix systems running in your facility for any amount of time, chances are they contain ControlNet communication modules for the communication between processor chassis and their controlled remote I/O chassis as well as a myriad of other uses. Being a deterministic, as well as a stable...

Flex I/O – How to add on ControlNet to ControlLogix (S22)

In today's article (and video) I walk through how to add ControlNet Flex I/O to a ControlLogix system: NOTE: This article is not a comprehensive ControlNet tutorial, so if you're not already familiar with ControlNet you'll likely want to learn about it prior to reading this article. Step 1) To start,...

Point I/O – How to add on ControlNet to ControlLogix (S18)

In this week's episode of The Automation Show, we take a look at how you add ControlNet Point I/O to a ControlLogix system: For more information, check out the "Show Notes" located below the video. [vimeo 366837698 w=750 h=420] The Automation Show, Episode 18 Show Notes: Related Articles: Point I/O vs Flex I/O...