In this episode of The Automation Show I share my top picks from Rockwell's ROKLive Logix and View Presentations:
For more information, check out the "Show Notes" located below the video.
The Automation Show, Episode 42 Show Notes:
Quick Link to Rockwell's ROKLive website:
TheAutomationBlog.com/ROKLive2020
Note: The above link redirects to the actual...
One of my favorite Rockwell Automation trade show sessions is “What's New in View.”
This year, the ROKLive presentation that came closet to that classic presentation was VZ02, “Visualization What's New,” and in today's article I'll highlight the slides that caught my attention:
(Note: To see a complete list of products featured in...
One of my favorite Rockwell Automation trade show sessions has always been "What's New in Logix."
This year, the ROKLive presentation that came closet to that classic presentation was CL03, "What's New and Notable in the Integrated Architecture System," and in today's article I'll highlight the slides that caught my...
I review the "What's New in FactoryTalk View Site Edition" in Episode 47 of The Automation Podcast.
Watch the Podcast:
[vimeo 365841896 w=750 h=420]
Listen to the Podcast:
I review the "What's New in Studio 5000" software presentation in Episode 46 of The Automation Podcast.
Watch the Podcast:
[vimeo 365840154 w=750 h=420]
Listen to the Podcast:
I review the "What's New in Logix and View" hardware presentation in Episode 45 of The Automation Podcast.
Watch the Podcast:
[vimeo 365835287 w=750 h=420]
Listen to the Podcast:
Of all the Rockwell Automation TechED 2018 presentations made available last week, the first ones I went through were the "What's New" presentations, as I'm always looking to find out what's new and coming from Rockwell.
In today's article I'll review my top five Logix announcements from the "What’s New in...
If (like me) you didn't have $2,000 in your training budget (and a week to spare) to attend Rockwell Automation's TechED 2018 last week, you'll be glad to know that the good folks over at Rockwell Automation have once again made many (if not most) of their TechED presentations...
If you didn't attend Rockwell Automation's TechED this year, you'll be happy to know that the good folks over at Rockwell have made the majority of the presentation and lab manual downloads available free of charge.
Unfortunately, it's not super easy to find these downloads, so in today's article I show you how:
1)...
Update: Check out our updated article HERE.
If like me you didn't get to attend Rockwell Automation's TechED this year, you'll be happy to know that once again the good folks over at Rockwell have made the majority of the presentations and lab manuals available for free online.
So where are they, and...
In today's article I'm sharing pictures from a friend who attended Rockwell's TechEd 2016:
TechEd 2016 Venue:
TechEd 2016 General Sessions:
TechEd 2016 Hands-on Labs:
A huge "Thank You" to my friend Mace who sent in the above pictures!
If you're attending Rockwell Automation's TechED event this week I'd love to see your pictures of the general session, individual sessions, the welcome reception and EdFest!
To send them to me, if you already have my cell phone you can text them to me there, otherwise you can email them...
Question of the Week:
Are you planning on attending Rockwell Automation's TechED in June?
Last week I received the annual email inviting me to sign-up for Rockwell Automation's TechED event.
This year it's being held at the Rosen Shingle Creek hotel in Orlando, Florida, from June 12th to the 17th.
While I've enjoyed attending so many TechEDs over the...
Sign-up here by May 9th to save $300.
With over 150 technical sessions and presentations by industry experts, Rockwell Automation's TechEd has always been one of my favorite events going all the way back to the very first one.
And just yesterday I received my annual email inviting me to sign-up...
If you missed Rockwell Automation's TechED this year like I did, you'll be happy to know Rockwell has made the majority of the presentations and lab manuals available online.
In today's article, I'll walk you through the steps to download them.
1) Start by visiting www.RSTechED.com, which will redirect you to the...
This year some very lucky attendees of Rockwell's TechEd had the opportunity to test drive Rockwell's next generation of HMI's, the PanelView 5500.
It's been literally years since the last hand-on sessions were offered for the PanelView 5000, and with limited seating available only those who signed-up very early had the opportunity to register for the session.
Before...
My all time favorite sessions at Rockwell Automation's TechED are the "What's New" sessions.
This year these sessions didn't disappoint, with several new products revealed in "What’s New in Integrated Architecture."
Below I share my "top five" picks from this session, and I'll also include the complete presentation at the bottom of this page.
CompactLogix Hardware
First...
Last week Rockwell held it's annual week-long training event, Rockwell Automation TechED, in beautiful downtown San Diego, California.
Regretfully, for the first time in a very long time I wasn't able to attend the event.
But now that its is over I'm trying to find out what I missed, and in today's article I share the best "TechED Session Videos" I could find:
First...
In today's article I'm listing all the TechED sessions I'd recommend to advanced users of Rockwell Automation products:
CL11 - Logix: Advanced Lab
First up is this pick and choose hands-on lab session on Studio 5000, a great way to learn advanced features.
CL15 - SLC Controller to CompactLogix Migration Lab
This hands-on lab walks...
In today's article I'm listing all the TechED sessions I'd recommend to new users of Rockwell Automation products:
SY01 - Introduction to the Integrated Architecture Control and Information System
What does 'Integrated Architecture' mean? This session lays it all out, and is a great place to start.
CL02 - Rockwell Software Studio 5000® Logix...