Season 1

The Automation Minute and Show Collection 1: 2013-2020 Now Available!

The Automation Minute and Show Collection 1: 2013-2020 includes all 287 episodes across five seasons for more than 29 hours of automation tips and tutorials for just $35 on a USB 3.0 Flash Drive, or $30 for the Digital Edition (digital comes with lifetime streaming and downloads.) For product links,...

Video Seasons On Sale – Save Up To 40%

[vimeo 522824133 w=640 h=360] Includes lifetime downloads and streaming! Save even more with these coupons: Buy any single season and save 25% with coupon code "Save25" Buy two or more seasons and save 40% with coupon code "Bundle40" The Automation Minute Season 1: $19.99 Sale: $14.99 Season one of The Automation Minute consists...

MicroLogix 1400 – Use LCD to Change Ethernet Address (M55)

In The Automation Minute: Episode 55, Shawn Tierney shows you how to use the MicroLogix 1400’s LCD to find and set its Ethernet Address. Note: You can buy a hi-def, ad free, digital download of this episode for $1 here: www.TheAutomationMinute.com/videos [vimeo 468216658 w=640 h=360]

MicroLogix 1400 – Use LCD to Enable DCOMM (M54)

In The Automation Minute: Episode 54, Shawn Tierney shows you how to use the MicroLogix 1400’s LCD to enable the serial port's DCOMM mode. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468216198 w=640 h=360]

MicroLogix 1400 – Use LCD to Change Trim Pots (M53)

In The Automation Minute: Episode 53, Shawn Tierney shows you how to use the MicroLogix 1400's LCD to change its Digital Trim Pots. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468215660 w=640 h=360]

MicroLogix 1400 – Use LCD to Change Mode (M52)

In The Automation Minute: Episode 52, Shawn Tierney shows you how to use MicroLogix 1400’s LCD to change its mode. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468215124 w=640 h=360]

MicroLogix 1400 – Use LCD to Monitor Data (M51)

In The Automation Minute: Episode 51, Shawn Tierney shows you how to use the MicroLogix 1400’s LCD to monitor and change data table values. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468214438 w=640 h=360]

MicroLogix 1400 LCD Display (M50)

In The Automation Minute: Episode 50, Shawn Tierney takes you on a short tour of the MicroLogix 1400's LCD Display. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468214037 w=640 h=360]

MicroLogix 1400 Expansion I/O (M49)

In The Automation Minute: Episode 49, Shawn Tierney shows you how to add expansion I/O to the MicroLogix 1400. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468213482 w=640 h=360]

MicroLogix 1400 Memory Module (M48)

In The Automation Minute: Episode 48, Shawn Tierney shows you where the MicroLogix 1400's memory module is installed. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468213281 w=640 h=360]

MicroLogix 1400 Battery (M47)

In The Automation Minute: Episode 47, Shawn Tierney shows you where the MicroLogix 1400's battery is located and how to replace it. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468212952 w=640 h=360]

MicroLogix 1400 Comm Port, Cables (M46)

In The Automation Minute: Episode 46, Shawn Tierney takes you on a short tour of the MicroLogix 1400's communication ports and cables. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468212111 w=640 h=360]

MicroLogix 1400 Terminal Blocks (M45)

In The Automation Minute: Episode 45, Shawn Tierney takes you on a short tour of the MicroLogix 1400's removable terminal blocks. Note: To find out how you can get a copy of Shawn's low cost PLC training video visit http://www.TheAutomationSchool.com [vimeo 468211351 w=640 h=360]

MicroLogix 1400 (M44)

In The Automation Minute: Episode 44, Shawn Tierney introduces you to the MicroLogix 1400 Note: To find out how you can get a copy of my Micro Programmable Controller training video, please visit http://www.TheAutomationSchool.com [vimeo 468210495 w=640 h=360]

Automation Fair 2014 Episode 2: Dalsa Camera Plays Rock Band (AF12E2)

In The Automation Minute, Automation Fair 2014 Episode 2, I share a video of a Dalsa camera playing Rock Band at Rockwell's Automation Fair. [vimeo 468218307 w=640 h=360]

Automation Fair 2014 Episode 1: Machines in Motion (AF12E1)

In The Automation Minute, Automation Fair 2014 Episode 1, I share two minutes of video of machines in motion from Rockwell's Automation Fair 2014. [vimeo 468217320 w=640 h=360]

MicroLogix 1100 – Using the LCD to Enable DCOMM Mode (M43)

In The Automation Minute: Episode 43, Shawn Tierney walks you through using the MicroLogix 1100’s LCD to enable its DCOMM mode Note: To find out how you can get a copy of my Micro Programmable Controller training video, please visit http://www.TheAutomationSchool.com [vimeo 263224167 w=640 h=360]

MicroLogix 1100 – Using the LCD to change the Trim Pot Values (M42)

In The Automation Minute: Episode 42, Shawn Tierney walks you through using the MicroLogix 1100’s LCD to change its digital Trim Pot values. Note: To find out how you can get a copy of my Micro Programmable Controller training video, please visit http://www.TheAutomationSchool.com [vimeo 263223673 w=640 h=360]

MicroLogix 1100 – Using the LCD to Change Mode (M41)

In The Automation Minute: Episode 41, Shawn Tierney walks you through using the MicroLogix 1100’s LCD to change its mode. Note: To find out how you can get a copy of my Micro Programmable Controller training video, please visit http://www.TheAutomationSchool.com [vimeo 263223378 w=640 h=360]

MicroLogix 1100 – Using the LCD to find the IP and MAC address (M40)

In The Automation Minute: Episode 40, Shawn Tierney walks you through using the MicroLogix 1100’s LCD to find its IP and MAC address. Note: To find out how you can get a copy of my Micro Programmable Controller training video, please visit http://www.TheAutomationSchool.com [vimeo 263223182 w=640 h=360]