Back on August 20th I blogged here about if it was possible to save a FactoryTalk ViewStudio Machine Edition version 7.0 project as a previous version. I found that while you could open a v7 project in v6.1 by saving the project as a v6.1 MER, you could not open any older MER’s in older versions of ViewStudio.

So in today’s blog we’ll investigate whether we can save a FactoryTalk ViewStudio Machine Edition version 6.0 project as a previous version.

Creating and saving a FactoryTalk ViewStudio 6.0 Project

The first step is to create a simple v6.0 ViewStudio ME project. For this test I created a single screen with numeric displays, as well as an RSLinx Enterprise shortcut to a PLC as shown below:

ViewStudio Project open in v60Next, I created three runtimes for my test as seen below:

Save ViewStudio MER As v60 Save ViewStudio MER As v51 Save ViewStudio MER As v50For the last step in ViewStudio 6.0, I created a v6.0 APA file to test as well (not shown)

Attempting to open the v6 project in v5.1

With all my file creation duties in ViewStudio 6.0 complete, I shut down that VMware image and started my ViewStudio 5.1 image.

Once running, I first attempted to restore the v6.0 APA file on the 5.1 system and was greeted with the following message:

Open ViewStudio v60 APA In v51I wasn’t surprised this didn’t work, but wanted to be thorough so I gave it a shot.

Next, I attempted to restore the v5.1 mer I had saved in v6 above. To do this, I opened the FactoryTalk ViewStudio Application Manger and used the following steps:

Restore ViewStudio v51 MERRestore ViewStudio v51 MERRestore ViewStudio v51 MERAfter successfully restoring the 6.0 project using the 5.1 mer, I wanted to be sure everything worked so I opened the project in ViewStudio:

Open Restored ViewStudio ProjectAs you can see below, everything looks in order:

ViewStudio v60 Project in v51Successful with 5.1, I now moved on to ViewStudio 5.0.

Attempting to open the v6 project in v5.0

To start, I attempted to restore the v50 MER file using the same procedure I used above with version 5.1, but the end result is shown below:

Try to restore ViewStudio v50 MERThe only other thing I could think of doing was to import the v50 project. This is done using a procedure I first learned from Rockwell Tech Note, 8913 – Recovering a Project from the MER File which was previously a public document but now requires a tech connect.

After running the .MER on my machine using ME Station, I copied the contents of the ~mer00 folder from the temporary directory as described in Tech Note 8913. But when I attempted to import the .MED file into ViewStudio 5.0 I received the following error message:

Try to import ViewStudio v60 MEDConclusion:

In conclusion, while you can restore a version 6.0 project in ViewStudio 5.1 by saving the 6.0 project as a 5.1 MER, this is unfortunately not the case with older versions like v5.0.

I hope you find the above information helpful, and as always if you would like to comment please feel free to click on the “post a comment or question” link below.

Until next time, Peace ✌️ 

Shawn M Tierney
Technology Enthusiast & Content Creator

Have a question? Join my community of automation professionals and take part in the discussion! You'll also find my PLC, HMI, and SCADA courses at TheAutomationSchool.com.

If you found this content helpful, consider buying me a coffee here.

Shawn Tierney

(2,518 views)

2 COMMENTS

  1. I do restore the .apa file to .med , and i make a runtime in FTV V7. The problem is, the runtime aplication can not run into the PV+ that have firmware version 4.00.12 (cpr7). My question is, how can i run that app runtime in PV+ with firmware v4.00.12? And i dont want to upgrade the PV+ Firmware. Please for the help, Thank you.

    Amru

LEAVE A REPLY

Please enter your comment!
Please enter your name here